Holykell standard carton box for deep well level sensor,
ensure goods well intact when receive.
Shenzhen/Shanghai/ Any port of China
1 - 10
To be negotiated
Holykell factory HPT607 Depth Well Water Level Sensor
HPT607 is a submersible level sensor are designed with a slim 19mm diameter body to enable it to fit small access ports. It consists of an imported MEAS TE piezoresistive sensing element encased in 316 SS housing with an integral welded 316 stainless steel barrier diaphragm. It is widely used in measure Liquid Level and Depth for Water and Waste Water applications, at Lift Stations, Shipboard, In-ground / Above Ground Tanks and with Inventory Tank Gauging
Slender designed with a slim 19mm diameter body
enable it to fit small access ports
It is perfect for deep underground wells and boreholes
All weled ,Triple waterproof IP design Through 3999 times testing in water
Protect sensor damage
Improve the water resistance and service life of the product
Reduce the impact force of the medium on the probe and reduce the influence of the probe shaking
on the measurement stability
Anti - corrosive geological water materials and high quality polyethylene gas cable
with a spring-reinforced cable seal ,5 layer reinforced process
even under the big mechanical loads of installation and submersible continuous use for 10 years
lightning surge reverse protection
short-circuit conditions to protect prevent reverse connection; Instant voltage overload protection
running reliable and longlasting in harsh condition
The vent with a filter
breath atmospher and protect moisture enter transducer
without maintenance, even in the most humid environments.
USA TE Chip,Digital PCB board
High accuracy 0.25%,Small temperature drift,automatically compensates for changes in barometric pressure
Stability,keep sensor running longer by reducing downtime and maintenance costs
1. 5-10 years design life, the lifelong maintenance; Import MEAS TE pressure cell ensure 0.25% F.S. factory accuracy;Its service life is 2-3 times of similar products.
2. Adopt the military printed-circuit board and wiring, with good electromagnetic compatibility;Anti-interference is enhanced by 300%, the stability is over 10 years.
3. Slender design Ø19mm Diameter Body fit for small access ports.
4. The unique design of 4 hole filter design, it Can effectively filter out impurities,prevent blockage, prevent shock; Prevent plugging rate increases more than 80%
5. Automatic temperature compensation, 0 ~ 70℃, autocorrection temperature drift.
6. Five layers of seamless and waterproof dustproof connection design, international level IP68;12 mm waterproof and oil-proof cables, Custom PU, PE or PTFE cable lengths.
The HPT607 (level sensor) is designed with a slim 19mm diameter body to enable it to fit for small access ports,is widely used in measure Liquid Level and Depth for Water and Waste Water applications, at Lift Stations, Shipboard, In-ground / Above Ground Tanks and with Inventory Tank Gauging. And are highly praised by consumers.
·Deep well and borehole measurements
·Down Hole measurement
·Surface Water Monitoring
·Control of Lift and Pumping Stations
·Level Measurement in Storm Water
In order to recommend you the most suitable products and make an accurate quotation,please provide the following information and send it to our sales when you are going to makean inquiry, thanks !